DEMAREC - Photos
 Portal | Company profile | Product range | Used products | Dealers | Service | News | Trade fairs | Contact 
Products
 Multi-Quick Processors
  • - Images
    		•
  • - Movies
    		•
  • - PDF
    		•

    Deze pagina uitprinten

    Multi-Quick Processors

    Robust Innovation = Low total cost of ownership.


    At the 2004 Bauma, DEMAREC has launched a new generation Multi Processors.
    The Multi-Quick Processor in the MQP series. The MQP-series has been developed according a totally renewed concept, in which the emphasis lies on efficiency in the broadest sense of the word.
    The MQP is available with jaws suited for the cutting and pulverising of concrete construction, concrete steel and for the cutting of steel constructions and scrap. All jaws are perfectly suited for the heavy duty tasks in demolition and recycling.
    The MQP is equipped with 2 rotation motors with shock valves for extra rotation power.
    Over more, the oil transit has been supplied with 2 extra channels which, in the future, can be optionally equipped with a greasing system and/or water spraying system.
    DEMAREC MQP's have a very advantageous power to weight ratio and a big jaw opening.



    By using the new DemaLink-System, which has been developed by DEMAREC itself, the jaws can be changed hydraulically extremely fast and easily. In less than 10 minutes the MQP changes from a scrap sheer into a concrete pulveriser or a concrete cutter. This means no unnecessary down time and always the right jaw for the job. Because of the DemaLink-System the jaws can be changed safely on location by just 1 person.



    All DEMAREC Multi-Quick Processors are equipped with the DemaPower-System.
    This unique technique has also been developed by DEMAREC itself.
    The DemaPower-System has a double acting speed valve, which gives the MQP more power and results in extreme fast cycle times.
    The jaws can be opened and closed within 5 seconds. And, because the cylinder has four pressure chambers, it has 20% more power than a conventional cylinder. This results in a huge gain of capacity.

    Exchangeable wear parts
    What makes the DEMAREC Multi-Quick Processors unique is that all available jaws are fully built out of exchangeable wear parts.
    This goes for the upper jaw, as well as the lower jaw. This makes welding of the jaw practically unnecessary and avoids metal fatigue of the main material. Moreover the wear parts can be replaced on site for maintenance. This avoids unnecessary transport of the pulveriser so it can work continuously.

    Main Features:

    • Demalink-Systeem, hydraulically changing the jaws within 10 minutes
    • Very powerful because of the DemaPower-System
    • Exchangeable wear parts
    • Exchangeable knifes
    • Jaw guided stabilization behind the pivot point at both sides
    • 2 Rotation motors for extra rotation power
    • Rotary joint with 2 extra channels
    • Filters in rotation circuit
    • Persuades because of small weight, high closing force and big jaw opening
    • Possible to change wear parts on site
    • Optimal cylinder protection
    DEMAREC MQP


    DEMAREC Multi-Quick Processors
    Type 
    		 MQP-25-Y MQP-30-Y MQP-45-Y MQP-60-Y
    Carrier weight*
    		 18-25 ton* 22-35 ton* 32-50 ton* 45-65 ton*
    Opening/Closing Pmax
    		 350 bar 350 bar 350 bar 350 bar
    Flow
    		 120-200 L/min 150-250 L/min 200-300 L/min 300-400 L/min
    Rotation Pmax
    		 170 bar 170 bar 170 bar 170 bar
    Flow
    		 40-60 L/min 40-60 L/min 40-60 L/min 40-60 L/min
    Cycle time Opening/Closing
    		 1,5 / 2,3 sec 2,0 / 2,3 sec 2,0 / 2,9 sec 2,0 / 2,8 sec

    		Combi-jaw   Demolition-jaw
    Type 
    		 MQP-25-C MQP-30-C MQP-45-C MQP-60-C   MQP-25-D  MQP-30-D MQP-45-D MQP-60-D
    Weight**
    		 1960 kg 2600 kg 3200 kg 4600 kg 1950 kg 2450 kg 3150 kg 4375 kg
    Closing force front tooth
    		 75 ton 90 ton 120 ton 140 ton 80 ton 95 ton 125 ton 145 ton
    Jaw opening
    		 785 mm 875 mm 990 mm 1150 mm 785 mm 870 mm 990 mm 1175 mm
    Width of upper jaw
    		 90 mm 100 mm 100 mm 100 mm 90 mm 100 mm 100 mm 100 mm
    Width of lower jaw
    		 375 mm 440 mm 450 mm 480 mm 470 mm 470 mm 515 mm 550 mm
    Depth
    		 810 mm 920 mm 975 mm 1050 mm 810 mm 900 mm 960 mm 1090 mm
    		Demolition-pulveriser-jaw   Steel-jaw
    Type 
    		 MQP-25-P MQP-30-P MQP-45-P MQP-60-P   MQP-25-S MQP-30-S MQP-45-S MQP-60-S
    Weight**
    		 1990 kg 2500 kg 3250 kg 4650 kg 1900 kg 2375 kg 3015 kg 4400 kg
    Closing force front tooth
    		 75 ton 90 ton 120 ton 140 ton 275 ton*** 310 ton*** 390 ton*** 440 ton***
    Jaw opening
    		 790 mm 880 mm 980 mm 1150 mm 370 mm 410 mm 465 mm 540 mm
    Width of upper jaw
    		 200 mm 350 mm 400 mm 450 mm 100 mm 120 mm 120 mm 120 mm
    Width of lower jaw
    		 400 mm 470 mm 515 mm 560 mm 320 mm 355 mm 375 mm 410 mm
    Depth
    		 810 mm 830 mm 945 mm 1050 mm 560 mm 600 mm 700 mm 750 mm
    		Tankschear-jaw   Universal-jaw
    Type 
    		 MQP-25-T** MQP-30-T MQP-45-T MQP-60-T   MQP-25-U MQP-30-U MQP-45-U MQP-60-U
    Weight**
    		 2050 kg 2560 kg 3160 kg 4325 kg - - 3090 kg -
    Closing force front tooth
    		 270 ton 330 ton*** 425 ton*** 605 ton*** - - 135 ton -
    Jaw opening
    		 333 mm 335 mm 390 mm 400 mm - - 690 mm -
    Width of upper jaw
    		 100 mm 120 mm 120 mm 150 mm - - 310 mm -
    Width of lower jaw
    		 265 mm 305 mm 305 mm 355 mm - - 525 mm -
    Depth
    		 570 mm 575 mm 630 mm 660 - - 830mm -

    *Depending of lifting capacity of carrier / **Weight excluding standard brachet / ***Mid upper blade
    Subject to change without notice.


    Advanced Equipment Technology

    Copyright © 2006-2012 Demolition and Recycling Equipment B.V.
    All content of this website is protected by national and international copyrights and cannot be published or used by third parties in any form whatsoever without the prior written permission of the copyright holder.